Free Apps Online

Recently, Samsung rolls out Android 6.0.1 [6.0] Marshmallow for Galaxy J7 and J5. Here we are telling How to install TWRP Recovery and Root Galaxy J7 by uses ODIN. This method is tested, but do it with your own risk I am not responsible for any damage, delete files and other issues. Before doing root or installing custom recovery take a backup of Photos, Music, Documents and other important data.

• SuperSU Zip
• TWRP Recovery
• ODIN for PC
• Samsung USB Drivers for PC (Download all files from end of the Post)
• Device battery at lest 40% Charged

First, you have to install the USB Drivers on your PC. So, Download USB_Drivers from end of post. Once it downloaded, Connect your J7 to PC using a data cable and Run setup and install it.

How to Install TWRP Recovery on Galaxy J7

1. Download ODIN and TWRP Recovery on your PC.
2. Extract both Odin and TWRP Zip file using WinRAR and you will get a twrp-2.8.7.0-j7elte_2.tar file and Odin Software.
3. Run ODIN on your PC.
4. Now Power Off your J7. Then boot your device in download Mode by pressing Volume Down + Home Button + Power Key simultaneously, Now you will see warning message just press the volume up button to skip it and it, will reboot your device into Download Mode.
5. Connect your J7 using data cable
6. Once, you connected, it with show ID: Com box will turn blue in ODIN_interface.
   
7. Now just click on AP from Odin and select the twrp-2.8.7.0-j7elte_2.tar from where you extracted it.
   
8. Once its selected, Hit on Start button and wait until it done
9. Once its done, It will reboot automatically. Now you can use TWRP Recovery for installing custom ROM, zip and other custom modification file on your device.

How to Root Galaxy J7 on Android 6.0

1. Make sure before root your device, You have to install custom recovery for installing root.zip file.
2. Download SuperSU Zip on your PC.
3. Copy SuperSU.zip on your device internal storage.
4. Power Off your device and Reboot into recovery mode by pressing Volume UP + HOME + Power buttons.
5. Once Recovery Open, Tap on Install Button.
6. Now Find and Select SuperSU.zip file, which you copy in your device. Swipe to Confirm Flash. It can take up to 1 minutes.
7. Once Completed. Tap on Wipe Cache/dalvik.
8. Now Go back and Reboot your device.

Congratulation, Now you can use your Samsung Galaxy J7 with ROOT and Custom TWRP Recovery. With TWRP Recovery you can install any Custom ROM and Zip file like Xposed Framework zip. And with you can access system file and modify it according to your requirement. You can also check out Update Android 6.0 on Samsung Galaxy Tab 2 If you find anything help full please Share this tutorial with your friends.

Hello Guys, AS we know as Samsung release Marshmallow firmware for Galaxy J7 device and In this post we are talking about How to Update Galaxy J7 to Android 6.0 Marshmallow Official firmware using FOTA Auto update and ODIN Manual Update. You can Root Galaxy J7 and Install TWRP Recovery in Marshmallow firmware.

• Make A Backup of your Personal Data, Contact, WhatsApp Chat, and internal storage, because there is no guarantee of keeping the data.
• FOTA Update is Not working for ROOT/Custom Recover users, So use manual ODIN Method.

• Marshmallow File (Size 872MB) only for ODIN user (Download from end of the post)
• ODIN Software
• Battery Charged at lest 40% Percent
• Data Cable

How to Update Galaxy J7 to Marshmallow Official

1. Go to Settings > About > System Update
2. Tap on Check for Update
3. If your Device detects system update available, Download Update file (Size 872MB Approx)
4. After Update Install it on your device.

How to Update Galaxy J7 to Marshmallow Official using ODI

1. Download marshmallow firmware, USB Drivers and ODIN file from the end of the post.
2. Extract USB Drivers and Install it on your PC
3. Extract ODIN and Run on your PC
4. Turn Off your device and Boot device into Download Mode by press and hold "Vol Down + Home + Power" buttons
5. Once your device successfully enters into Download mode, Now Connect your device to USB Cable with PC
6. You will see an ID: COM port turned blue and Add message in the Odin that means your device has successfully connected with PC
7. Now add the firmware ‘.tar‘ file to the PDA tab in Odin.
   
8. Make sure that only these two options are tick “Auto Reboot” and “F.Reset Time“.
   
9. Now click on ‘Start‘ button and it will start flashing the file. Wait until you see ‘Pass‘ in Green Color on Odin screen.
10. Done and Enjoy

Congratulation, Now you can taste Marshmallow sweat on your SAMSUNG Galaxy J7. Share this tutorial with your friends, Comment down below if you have any question. Before you Go read about How to Install Android N Boot animation on Any Android you can also install it on your Galaxy J7 for free.